Commercial Water King Schematics

Ranger's Lodge - Cornbury Park - Oxon OX7 3HL
Facsimile:- +44 (0) 1608 819060 - Technical Help Line: +44 (0)1608 811707

home - about us - continuing professional development - careers - contact us

you are here: commercial / electronic conditioners / commercial schematics /

Electronic/Electromagnetic Water Conditioners

Overview
Plumbing Requirements
Location
Suggested Specifications
Size Selection
Commercial Schematics
Residential Schematics
Installation Instructions and Catalogues
Merchant Stock Codes

NB: These diagrams are illustrative for siting of Water-King units. They are not intended to be examples of definitive domestic water services.

Commercial Schematics

Vented System with Direct Fired Water Heater
Unvented System with Calorifier
Cold Water Storage Tank with Booster Set
Offices and dwellings with local Electric Water Heaters

click image for larger view	High Level Cold Cistern With Low Level Plant Room Treat the CWDS close to the water heater with a second unit on the HWSR after the circulation pump. One of the CWS drops from the header is treated with a third unit.
click image for larger view	Hot Water Storage Pumped to Water Heater Locate a Water-King after the pump. On low water content finned type water heaters it should be on the return. On plate and frame heat exchangers it may be fitted on the return only.
click image for larger view	Cold Water Storage Cistern with Booster Set A Water-King is fitted to the common cold services on the outlet of the booster set. A second Water-King is fitted to the HWSR.
click image for larger view	Electric Water Heaters in Offices Due to the length of time the water resides in the heater, it is best to treat each heater with a dedicated Water-King unit.

NB: These diagrams are illustrative for siting of Water-King units. They are not intended to be examples of definitive water services.

Ranger's Lodge - Cornbury Park - Oxon OX7 3HL
Telephone:- +44 (0) 1608 811707
Facsimile:- +44 (0) 1608 819060
info@lifescience.co.uk